AC200 Firmware V5

AC200 Firmware

This file is the firmware for the AC200 controller.

It can be used to update the AC200controller to the latest revesion.

Features include

Version 4.70
Requires loader
Requires V5 hardware

Warning- This file is provided for the benefit of Airmaster propeller owners. It is an offence to copy or use it for purposes other than support of Airmaster products. Any infringment of this will be pursued to the full extent of the law.

Downoad software using link below

Download sample

Enquire

Specification

Build History

Version	Date	Bug/Feature	Description	Update	Hardware

4.70	22/12/21	Bug/Feature	Fix bug when mode is changed while on Coarse stop.	D	V5

4.63	24/Oct/19	Feature	Allow CAN and Auxilliary Serial ports to share same Auxilliary Connector pins, and internally mount transceivers	Discretionary	V5

4.62	20/Aug/19	Bug	Incorrect XStatus of 1 (Pitch decreasing) when coming out of FEATHER. Should be 13. Autogyro Reverse bug fix	D	V5

4.59	11/Jul/20	Bug/Feature	When RPM = 0, XStatus=0. Should be =4 (No RPM) Allow Cycle rate (previously 1 Hz) to be soft coded: AC200:Remote Control->Data Interval=n where n is value is in tenths of a second. Add X2 remote control protocol Requires parameter AC200:Remote Control ->Remote Control = 3 Note:V4 changes fix XStatus not = 4 and hardcode new cycle rate = 5Hz. Binary = AC200_4_451_5Hz.BIN	D	V5

4.57	24/Jul/19	Bug	Change current measurement logic	D	V5

4.55	9/Nov/18	Bug	FINE or COARSE indicator lights flashing orange rapidly when AC200 close to target RPM. Change RPM control logic so that minimum period for adjusting pitch is longer. AC200 diagnostic logging was generating new runs when RPM low. Fix: Correct RPM calculation logic AC200 sometimes signally at FINE or COARSE pitch stop falsely when pitch control motor active or braking. Fix: Stop status test when motor braking or active	M	V5

4.54	20/Sep/18	Bug	When no load on Maxon pitch change motor, and motor active the AC200 falsely signalled at a pitch stop. Increase sensitivity of current measuremnt to fix.

4.53	18/Jul/18	Feature	Add 24V supply logic. Note: Needs AC200 logic PCB version H or later, and AC200 power PCB marked 24V	D	V5

4.52	2/Apr/18	Feature	Add Autogyro functions	D	V5

4.46	16/Feb/17		port to V5 hardware

Enquire

Your name

Your email

Enquiry